Troy Sewer Pros logoTroy Sewer ProsTrenchless Sewer Repair · Troy, OH
CIPP Pipe Lining photo

Troy Sewer Pros

CIPP Pipe Lining in Troy, OH

CIPP pipe lining in Troy, OH repairs root-damaged clay and cast iron sewer pipe without digging. Free camera-based estimates.

  • 15+ Years local experience
  • 500+ Projects completed
  • Licensed & Insured

Serving Troy and nearby communities.

Cured-in-place pipe lining creates a new pipe inside the old one, no trench required. It's the go-to fix for the clay pipe common under homes near Troy's historic downtown, where decades of root intrusion have left cracks and offset joints but the pipe's general path is still usable. Troy Sewer Pros runs a camera first to confirm lining is the right call before quoting the job.

The liner is a resin-saturated tube pulled or inverted into the host pipe, then cured into a smooth, jointless interior. For homes where root problems keep coming back after cabling alone, lining addresses the cracks roots are getting in through, not just the roots themselves.

What's included

What's Included With CIPP Pipe Lining

Typically included: pipe cleaning, liner measurement and saturation, liner installation and curing, and a final camera inspection confirming the cured liner is smooth and fully bonded.

Optional: root cutting before lining if root mass is heavy enough to block liner insertion.

Customer prep: provide access to the cleanout and keep the line clear of use during the cure window.

How it works

How Our CIPP Pipe Lining Process Works

  1. Pipe Cleaning photo
    Step 1

    Pipe Cleaning

    The existing pipe is thoroughly cleaned to remove debris and prepare the surface for lining.

  2. Liner Measurement photo
    Step 2

    Liner Measurement

    Precise measurements ensure the liner fits the exact length and diameter of the pipe.

  3. Resin Saturation photo
    Step 3

    Resin Saturation

    The liner is saturated with resin to prepare it for insertion and curing.

  4. Liner Insertion photo
    Step 4

    Liner Insertion

    The saturated liner is inserted into the host pipe using air or water pressure.

  5. Curing Process photo
    Step 5

    Curing Process

    Heat, UV light, or ambient curing hardens the liner into a solid new pipe wall.

  6. Final Inspection photo
    Step 6

    Final Inspection

    A camera inspection confirms the cured liner is smooth and properly bonded.

Materials

Materials and Methods for CIPP Pipe Lining

  • Felt Liner Tubes photo

    Felt Liner Tubes

    Felt-based tubes serve as the structural base for the resin-saturated lining, well suited to the irregular interior of older clay pipe found near Troy's courthouse square.

  • Epoxy Resin Blends photo

    Epoxy Resin Blends

    Formulated resin blends provide strength and chemical resistance once cured, holding up against the acidic soil conditions near the Great Miami River.

  • Inversion Equipment photo

    Inversion Equipment

    Inversion drums turn the liner inside out as it's installed, reaching bends common in century-old pipe runs.

  • Calibration Tubes photo

    Calibration Tubes

    Calibration tubes press the liner firmly against pipe walls during curing for a tight, even fit.

  • Heat Curing Units photo

    Heat Curing Units

    Heat sources accelerate resin curing, keeping most jobs to a single service day.

  • End Seal Fittings photo

    End Seal Fittings

    Finishing fittings create a clean, watertight transition where the liner meets existing fixtures.

When to call

When to Call for CIPP Pipe Lining

Call (937) 761-3850 for a camera inspection before deciding on a repair method.

  • Roots keep returning a season or two after cabling the line.
  • A camera inspection shows multiple cracked joints along an otherwise intact pipe path.
  • Drains are slow in more than one fixture at the same time, suggesting a main line issue rather than a single clog.

FAQs

CIPP Pipe Lining FAQs

How much does CIPP pipe lining cost in Troy?

Cost depends on pipe length, diameter, and number of access points, typically landing between a few thousand and the mid five-figure range for longer runs.

How long does CIPP pipe lining take?

Most residential jobs complete in a single day: cleaning, insertion, and curing all happen in one visit.

Do I need a permit for CIPP pipe lining?

Often no, since the work happens inside the existing pipe without excavation, but verify with the City of Troy if the line connects to the public main.

Is DIY CIPP pipe lining a good idea?

No. Resin handling, liner inversion, and curing require specialized equipment and timing that isn't available as a rental tool.

Can CIPP lining fix tree root problems or just slow them down?

Lining seals the cracks roots were entering through, which addresses the underlying damage rather than just clearing roots temporarily.

What's the lifespan of a CIPP liner versus full replacement?

A properly cured liner typically performs for decades, similar in durability to new pipe, though full replacement is sometimes preferred for severely collapsed sections.

How do I know if I have clay pipe or cast iron under my Troy home?

A camera inspection identifies pipe material directly. Homes near the historic downtown are more likely to have original clay pipe.

What is typically included in CIPP pipe lining?

Cleaning, liner installation, curing, and a final camera pass confirming the result, all detailed in a written estimate first.

Next step

Get a CIPP Pipe Lining Estimate in Troy

Request a free estimate and see the camera footage before committing to a liner job.

Before & after

Before and After CIPP Pipe Lining

  • CIPP Pipe Lining photo
    Before
  • CIPP Pipe Lining photo
    After

Ask about CIPP Pipe Lining

Tell us about the project and how to reach you.

Call (937) 761-3850